This beading & sequin foot can be used to attach strings of beads either to the edge of the fabric or in the centre of the fabric. The beading foot is used for sewing on beads up to a diameter of 4 mm, sequins and ribbon as well as for sewing on cords for a decorative effect.

The gathering foot is suitable for sewing two layers of fabric together, while also gathering the bottom layer of fabric when the differential feed is used and the stitch length is increased.

This foot is the transparent version of the standard presser foot.

The elastic foot has two possible applications. Firstly, it makes it very easy to attach an elasticated tape that is evenly stretched to a fabric edge, while also finishing the edge without damaging the tape. Secondly, the foot has a special inlet that allows you to easily insert additional thread, fishing line or wire as a seam stabiliser.

The piping foot is available with a diameter of 3 or 5 mm. It has a specially incorporated guide groove on the sole of the foot, which guides the piping tape or piping precisely. You can use it to create your own piping or sew in a ready-made piping. The advantage is that the fabric edges are trimmed and neatened when the piping is sewn in.

The transparent flat sole foot provides a better view of the stitches. Decorative stitches, such as flatlock seams, can be sewn effortlessly due to increased visibility. Its long, smooth sole makes it easier to sew over several layers of fabric (overlapping seams on cuffs, side seams, etc.) and on materials such as fleece, denim or similar. The raised markings on the front of the foot serve as a stitching guide, as they indicate position of each needle, so that the seam runs correctly.

The flat sole foot makes it easier to sew over several layers of fabric (fleece, jeans, overlapping seams, etc.). The long, smooth design evenly distributes the foot pressure, allowing difficult areas to be sewn easily.

This sliding foot is specially coated to enable it to sew oilcloth, fleece fabrics or similar materials without any problems. Due to the design of the rear of the foot, it glides easily over cross seams, while preventing piling up.

This foot makes it easy to sew lace or borders onto the top of the fabric without causing damage, while also finishing the fabric edge in the same step.

This foot can be used to attach strings of beads either to the edge of the fabric or in the centre of the fabric. The beading foot is used for sewing on beads up to a diameter of 4 mm, sequins and ribbon as well as for sewing on cords for a decorative effect.